A GUIDE FOR YOUR NEXT PROJECT

Herringbone pattern guide

Interlocking rectangular blocks turn through a 45-degree lattice. The drawing creates the angled brick structure of a herringbone surface rather than simple parallel zigzags.

60 × 60 mm sample · 5 mm base unit
Screen preview scales to your device.

What is Herringbone useful for?

Structured panel designs

Use several repeats across a fabric panel so the interlocking blocks remain visible.

Angular layout studies

Compare a herringbone arrangement with brickwork or chevron before choosing a direction for your design.

Choose a scale and plan the layout

The underlying blocks have a two-to-one length-to-width ratio and rotate 45 degrees. The rectangular translation repeat is approximately 2.828 base units wide and high.

Check the full repeat at the proposed scale rather than judging one small corner. Whole-repeat fitting is useful when you want equal margins around the connected design.

This is a geometric block layout, not instructions for the embroidery stitch also called herringbone.

Print and transfer your Herringbone guide

  1. Open this pattern in the generator. Set the stitched area dimensions and choose A4 or US Letter.
  2. Download the PDF and print at 100% or Actual size. Measure the 50 mm calibration line on every sheet.
  3. For a larger design, join the numbered sheets using the printed 10 mm overlaps and alignment marks.
  4. Test a fabric-safe marking method on a scrap, then transfer the guide without stretching the cloth. Keep your seam allowance outside the design.

Read the complete printing and joining guide →