What is Isometric dots useful for?
Triangular layouts
Place six-direction shapes and small geometric repeats around evenly spaced points.
Construction sketches
Draw a triangular design on paper before deciding which lines to transfer to fabric.
Choose a scale and plan the layout
The base unit is the distance between adjacent dots along a horizontal row and along either sloping direction. Row height is approximately 0.866 times that unit.
Follow the staggered rows rather than assuming a square grid. Start from a central dot if your motif extends in several directions and check its overall width before transfer.
For the same horizontal spacing, these rows are closer together than Offset dots. They are not interchangeable when copying measured shapes.
Print and transfer your Isometric dots guide
- Open this pattern in the generator. Set the stitched area dimensions and choose A4 or US Letter.
- Download the PDF and print at 100% or Actual size. Measure the 50 mm calibration line on every sheet.
- For a larger design, join the numbered sheets using the printed 10 mm overlaps and alignment marks.
- Test a fabric-safe marking method on a scrap, then transfer the guide without stretching the cloth. Keep your seam allowance outside the design.