A GUIDE FOR YOUR NEXT PROJECT

Triangles pattern guide

An equilateral triangle mesh provides three equal-length directions. Alternating rows create upward and downward triangles throughout the drawing.

60 × 60 mm sample · 5 mm base unit
Screen preview scales to your device.

What is Triangles useful for?

Angular motif construction

Plan six-direction shapes and repeat their outlines against a consistent mesh.

Measured design sketches

Explore triangular subdivisions on paper before transferring selected lines to a panel.

Choose a scale and plan the layout

The base unit is a triangle side. A row is approximately 0.866 units high; a 5 mm side therefore gives a row height of about 4.330 mm.

Do not count triangle rows as though they were square cells. Measure the actual guide height and use the preview or whole-repeat result to check where the last row ends.

For an Asanoha design, choose its dedicated guide: this mesh alone does not include the leaf-forming spokes.

Print and transfer your Triangles guide

  1. Open this pattern in the generator. Set the stitched area dimensions and choose A4 or US Letter.
  2. Download the PDF and print at 100% or Actual size. Measure the 50 mm calibration line on every sheet.
  3. For a larger design, join the numbered sheets using the printed 10 mm overlaps and alignment marks.
  4. Test a fabric-safe marking method on a scrap, then transfer the guide without stretching the cloth. Keep your seam allowance outside the design.

Read the complete printing and joining guide →