A GUIDE FOR YOUR NEXT PROJECT

Crosses pattern guide

Small plus signs mark the intersections of a square grid. Their horizontal and vertical arms make each reference point easy to find while leaving the spaces between points clear.

60 × 60 mm sample · 5 mm base unit
Screen preview scales to your device.

What is Crosses useful for?

Precise marking

Locate measured intersections when a tiny dot is difficult to see on your chosen material.

Custom stitch routes

Plan lines or isolated accents around a grid without a continuous printed mesh.

Choose a scale and plan the layout

Spacing is the distance between cross centres. The marker arms stay short; changing spacing does not turn them into full cell-length crosses.

Test a few marks on a scrap and check that their centres remain clear after transfer. Use the centre as your reference rather than treating the arm ends as separate positions.

These are plus-shaped guide marks. Choose Cross stitch if you want diagonal X motifs instead.

Print and transfer your Crosses guide

  1. Open this pattern in the generator. Set the stitched area dimensions and choose A4 or US Letter.
  2. Download the PDF and print at 100% or Actual size. Measure the 50 mm calibration line on every sheet.
  3. For a larger design, join the numbered sheets using the printed 10 mm overlaps and alignment marks.
  4. Test a fabric-safe marking method on a scrap, then transfer the guide without stretching the cloth. Keep your seam allowance outside the design.

Read the complete printing and joining guide →