What is Square useful for?
First practice cloth
Use one small panel to compare stitch spacing, straight rows and changes of direction.
Measured patches
Position rows evenly across a rectangular patch while keeping the stitch area inside its seam allowance.
Choose a scale and plan the layout
Spacing is the side length of each square. At 5 mm, a 120 mm edge contains 24 full cells; increasing spacing makes fewer, larger cells without changing the panel size.
Mark a centre line first if your design needs to be balanced. Count cells from that reference and leave any seam allowance outside the guide dimensions.
The grid does not tell you which lines to stitch. You can transfer only the intersections or the routes your design uses.
Print and transfer your Square guide
- Open this pattern in the generator. Set the stitched area dimensions and choose A4 or US Letter.
- Download the PDF and print at 100% or Actual size. Measure the 50 mm calibration line on every sheet.
- For a larger design, join the numbered sheets using the printed 10 mm overlaps and alignment marks.
- Test a fabric-safe marking method on a scrap, then transfer the guide without stretching the cloth. Keep your seam allowance outside the design.