A GUIDE FOR YOUR NEXT PROJECT

Dots pattern guide

A square arrangement of points keeps the measuring structure of a square grid while removing its connecting lines. It leaves room to choose a stitch route as you work or draw a design over the points.

60 × 60 mm sample · 5 mm base unit
Screen preview scales to your device.

What is Dots useful for?

Open stitch planning

Place straight, diagonal or staggered rows by joining only the points you need.

Light transfer marks

Use small reference positions when a full line grid would make your fabric drawing harder to read.

Choose a scale and plan the layout

Spacing is the horizontal and vertical distance between neighbouring points. A diagonal connection is longer than that spacing, so check the actual stitch route before choosing a scale.

Transfer a few rows first and make sure the points remain visible on your fabric. A regular square border or centre mark can help you keep the rows aligned.

Printed dot size stays small as spacing changes. It is a position marker, not a stitch hole or an instruction to pierce every point.

Print and transfer your Dots guide

  1. Open this pattern in the generator. Set the stitched area dimensions and choose A4 or US Letter.
  2. Download the PDF and print at 100% or Actual size. Measure the 50 mm calibration line on every sheet.
  3. For a larger design, join the numbered sheets using the printed 10 mm overlaps and alignment marks.
  4. Test a fabric-safe marking method on a scrap, then transfer the guide without stretching the cloth. Keep your seam allowance outside the design.

Read the complete printing and joining guide →