A GUIDE FOR YOUR NEXT PROJECT

Diagonal pattern guide

This guide adds both diagonals to a square mesh. Each cell is divided into four triangles, giving you several directions to follow without drawing the angled lines by hand.

60 × 60 mm sample · 5 mm base unit
Screen preview scales to your device.

What is Diagonal useful for?

Angular samplers

Compare horizontal, vertical and diagonal rows within the same measured area.

Design construction

Plan diamonds, zigzags or symmetric details against a square reference grid.

Choose a scale and plan the layout

Spacing controls the underlying square side, not the length of a diagonal. A corner-to-corner diagonal spans approximately 1.414 times the square spacing.

Choose which directions you will use before transferring the guide. Marking all four triangles can be useful on paper, while fewer selected lines may be easier to follow on cloth.

Several lines meet at each crossing. Decide how the thread will handle those junctions using the instructions for your chosen technique.

Print and transfer your Diagonal guide

  1. Open this pattern in the generator. Set the stitched area dimensions and choose A4 or US Letter.
  2. Download the PDF and print at 100% or Actual size. Measure the 50 mm calibration line on every sheet.
  3. For a larger design, join the numbered sheets using the printed 10 mm overlaps and alignment marks.
  4. Test a fabric-safe marking method on a scrap, then transfer the guide without stretching the cloth. Keep your seam allowance outside the design.

Read the complete printing and joining guide →